Support
>
Telephone Adapters ( ATA ) and Phones
>
Linksys
    Telephone Adapters ( ATA ) and Phones
    Linksys - PAP2T - Automated Setup
    Automatically Setup Your Linksys PAP2-NA or PAP2T-NA

    This menu allows us to automatically setup your Linksys PAP 2 Device.
    By doing this we will be overwriting some settings that you may already have configured.
    If you are not using a " clean " or " untouched " device, we do recommend doing a factory reset before continuing.

    STEP 1: Factory Resetting the Device

    We need to delete all the existing settings on the device in order to set new.
    To wipe your adapter, pick up a telephone handset connected to the PAP2, dial " **** " ( that's the star symbol four times ),
    at the voice prompt dial " 73738# ", and then press " 1 " at the prompt.
    Your adapter will then reset and be ready for Step 2.

    STEP 2: Getting the IP Address Of Your Device

    We need to know the IP address of your Linksys adapter, which you will enter below.
    To determine your adapter's IP address, pick up a telephone handset connected to the PAP2, dial " **** ",
    and at the voice prompt dial " 110# ".
    Your adapter will read back its IP address to you.
    Enter the address, including the dots, below, overwriting the " 0.0.0.0 " entry:

    Enter the IP Address of your VoIP Box:

    USER ID Line 1 ( 09xxxxxx ): * Mandatory Field

    PASSWORD Line 1: * Mandatory Field

    Please Note: Only fill in the details below if you have a second line

    USER ID Line 2 ( 09xxxxxx ):

    PASSWORD Line 2:

Copyright © 2014 FaktorTel | Phone: 1300 731 625 | International: +61 7 3118 9598